93430 - SPC Race Style Upper Control Arm - Build Your Own

This part should fit your vehicle. It is a universal part.

Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 93430

Notes: Build Your Own Control Arm
Cross Shaft

Your Price: $102.16

Specs

Shaft Hole Spacing	6in Slotted Mount
Shaft Material	Aluminum

All Fitments

Product Description

These fully adjustable, rugged arms are recommended for circle track, road racing and drag applications. They allow the user to adjust the arm length and offset to attain the ultimate suspension geometry required to reach the winner’s circle. Each arm can be adjusted up to 2” in length and all components are interchangeable and may also be ordered separately.

Step Number 1
Measure Cross Shaft Bolt Hole Spacing From Center-To-Center

Step Number 2
Measure Length of Control Arm – Measure from the middle of the cross shaft to the center of the ball joint.

Step Number 3
Determine Type of Ball Joint Plate

• Full Sized GM Truck Bolt In Ball Joint Plate Measure center-to-center between the ball joint bolt holes that are farthest apart. This measurement should be 2-3/4” SPC Ball Joint part number is 92004.
• GM Metric (Midsized) Bolt In Ball Joint Plate Measure center-to-center between the ball joint bolt holes that are farthest apart. This measurement should be 2-1/2” – SPC Ball Joint part #92006. Also in 20° – SPC Ball Joint part #92008 & 92009.
• Chrysler Screw In Ball Joint Plate – SPC Performance offers ball joint plates that are welded flat (0°- SPC part #92003) or at an angle (10°- SPC part #92002) for these screw in type ball joints.